Human Resource Development Essay

In both definitions we see that learning was in some form mentioned as being part of human resource development, and from further understanding of HRD we see that learning is important in all aspects of HRD efforts. According to the text Human Resource Management by Jon M. Werner and Randy L. DeSimone they defined learning a relatively permanent change in behavior, cognition, or affect that occurs as a result of one’s interaction with the environment. There are three basic principles of learning contiguity, the law of effect and practice. Practice is stated to be repeating the event with the hope that it will increase the strength of what is being taught. For example in any sporting area practice is needed to strengthen the players and so to in the business environment. In understanding how practice works in order to maximize learning we look at the primary area of the training design under the categories of conditions of practice and retention of what is learned. There are at least six issues that relate to practice and learning they are; active practice, massed versus spaced practice sessions, whole versus part learning, overlearning ,knowledge of result and task sequences. From the six issues the three that I would considers using are; Active practice proposes that the individual who is being taught should be given the opportunity to repeatedly perform the task or use the knowledge being learned. For example surgeons, rescue squad, pilots, just to name a few should be given avenues to practice hat they learned. Same goes for training the mechanics to install the automobile air-conditioners using the new installation procedures, if the mechanics are allowed to practice the theory that was taught it would leave room for better understanding of what is required of them and result in better outcomes on the jobs confirming , that the new procedures was learnt. Massed versus spaced practice involve whether the training should be conducted in one session or divided into segments separated by a period of time. Studies have shown that spaced practice sessions lead to better performance and longer retention but are more effect for difficult and complex tasks, however the task at hand isn’t difficult and can be taught in one session. Overlearning is practice beyond the point at which the material or task is mastered. This is another condition in which the trainers can implement when training the mechanics to install the air conditioners using the new procedures, giving the mechanics enough opportunities to keep practicing the task will soon become simple The goal goes beyond the trainee learning the task or material but also retaining it. There are three additional issues that influence retention; these are the meaningfulness of the material, the degree of original learning and interference. The more meaningful and factual the information is the easier it is learned and remembered and since the new procedure is important for the installation of the air conditioners the mechanics would seek more interest and retain the information effectively , as they would see it fit to keep their jobs and acquire more customers. Secondly for the mechanics to continually retain the information being learned there should be little or no interference or it should be taken into consideration when training. This meaning that sometimes the knowledge of the old procedure might affect the way the mechanics learn the new procedure also if new steps are added while installing the air conditioner in a different vehicle it can cause confusion in the learning process. The case of the new Employee Assistant Programme Act, since it is an act where information may be presented in a document and the managers can always refer to it when needed, I would suggest using the conditions of active practice. This being the Employees Assistance Programme Act would be something that they would have to implement everyday so it would certainly give the managers the opportunity to perform the task and use the knowledge being used. Also because there is no real step by step process of implementing the act then the conditions of a massed practice session can be put in place, for example a meeting can be held where all managers are taught and given an explanation of the act and why it is necessary, as well as the document of the act where they can refer to when needed. By giving an explanation and ensure the managers what is the purpose and the reason for the Employee Assistant Programme Act , it leaves room for better retention since they are aware of the meaningfulness of they are being taught. Also distinguishing the difference from similar acts can reduce the interference of confusion and misunderstands. In conclusion if the these conditions and retentions are used in the training design both the employees and the managers can experience maximum learning and show that in order to learn practice is required. Read more: http://www. businessdictionary. com/definition/human-resource-development-HRD. html#ixzz2MgJJc071

Competition Bikes Inc. Storyline Essay

Introduction Competition Bikes Inc. is considering an expansion to Canada and is trying to determine whether to merge with or acquire the Canadian Biking Inc. facility. We take a look in this summary at capital structure approaches, Net Present Value and Internal Rate of Return and the concerns surrounding that. Competition Bikes working capital is discussed and finally an analysis on if the company should merge or acquire Canadian Biking Inc. Capital Structure Approach A1. This summary provides a report and recommendation of a capital structure that maximizes shareholder return. Capital Structure is how well a company finances its assets, operations and growth using short and long term debt, and common and preferred equities. Overall, more equity and less debt attracts investors. Equity is either common stocks, or preferred stocks. Competition Bikes Inc. is looking to expand to Canada. To expand, the company must have the most appropriate capital structure not only to be able to pay off debts, have an acceptable return on investment, and increase cash flow, but to have the appropriate funding to expand and for future stability and growth. Currently Competition Bikes has working capital, long term notes payable, common and preferred stocks, and retained earnings. We will use Earnings per Share (EPS) from the table below to make a recommendation as to what approach the company should use. This is what investors look into as well. There are five capit al structure approaches Competition Bikes can take to generate the capital required for the expansion. The table below shows the calculated EPS for each structure which is discussed after. 9% Bonds Only. Bonds are risky because they require a fixed interest payment that could negatively affect shareholder earnings if sales projections are not as anticipated. Payments are typically made semi-annually which decreases the company’s income. This is regarded as a debt, not equity which takes more time to realize benefits. This option yields the highest interest and lowers Competition Bikes Income before Tax (EBT). The plus to this option is that bonds are debt financing and therefore tax deductible. In some smaller companies this is less expensive that using equity to finance debts. Competition Bikes does not fall into this category really because it is unknown if profits will increase or dividends will be diluted in future years. Future monies earned will be used to pay off the debts and not be reinvested into the company as new earnings. Using moderate expected earnings before interest and taxes amounts (EBIT), the EPS for stockholders over 5 years with this option is .103. The lower EPS is means less common stock shares outstanding, less equity, and fewer dividends. The risk is higher in this option as highly leveraged companies tend to have difficulties with cash flow. 50% Preferred Stock and 50% Common Stock. In this option the investors fund  the expansion. Competition Bike’s equity is used rather than debts to finance growth into Canada. Investors have more of an invested interest in the company and Competition Bikes has less debt to income ratio. Preferred stockholders will earn dividend payouts on a regular basis while the Board of Directors determines if common stockholders receive dividends. Preferred stockholders also tend to hold on to their stocks longer preventing a declined value in them. There is no interest to pay back in this option therefore, all EBIT are retained. The EPS for this option over 5 years is .203, one of the highest two in this analysis. Investors will see an immediate return on investment beginning in year 9. This option yields the highest net income and preferred stock dividends. On a negative note, this option can be a lengthy process consuming time resources. 20% in 9% Bonds and 80% in Common Stock. The 20/80 option mix of bonds and common stock is a better option that 100% bonds. This option uses both debt and investors to fund the expansion and allows Competition Bikes to give less dividends if it so chooses. The debt to income ratio remains small here and interest low as only 20% is being used as debt. Over 5 years this option yields .197 EPS which is the close to the 50% preferred and common stock. There is more risk here as debts must be paid back on a strict schedule, regardless of income. However, EBT is higher and the total income available for common stock increases. 40% in 9% Bonds and 60% Common Stock. Like the previous option, this option uses both debt and investors to fund the expansion. While having 60% in common stock still keeps the company from forced dividend payouts, it’s not as safe as 20/80 option. The split in bonds and common stocks keeps interest low. Not as low as the 20/80 option, but not as high as the 60/40 option. The same holds true for available income. There is more available for common stock than 100% bonds. The EPS for this option is .182 because of the number of outstanding shares is higher than the 20/80 option. 60% in 9% Bonds and 40% in Common Stock. In this option, there is debt just as there is in the first option. The increase in interest (12%) causes less equity and fewer dividends. The income available for common stock is the low in this option. It’s also important to note that Competition Bikes had declining sales the past two years. It is unknown if they will have enough sales to meet their interest payments on time and continue business as usual. The EPS over 5 years with this option is .16, the second lowest. Recommendation. Capital structure as we can see can be tricky. It is the best balance of debt and equity to maximize returns, EPS. Excluding the 60/40 option, all the options show continued growth through the years. However, 50% common and preferred stock option yields the stronger EPS at .203 and is therefore the recommendation for Competition Bikes. The continued strength and growth in this option will maximize shareholder return, and yield addition dividends to investors with less risk. The increased EBIT will be retained in the company. The goals of this analysis were to ensure the highest EPS keeping shareholders satisfied while building strong net income in the business. The larger equity versus debt in the 50% Common Stock and 50% Preferred Stock accomplishes that. This option is recommended for Competition Bikes to improve the company’s financial position. The alternate capital structure would be the 20/80 option. Net Present Value and Internal Rate of Return A2. In this summary we discuss the Net Present Value (NPV) and Internal Rate of Return (IRR) methods in regards to the proposed investment. These areas determine if the investment is worth moving forward with the merger or acquisition without financially harming the company. The Capital Budget income statements were reviewed to make the following determinations. NPV. This method appraises investments. The calculation for NPV is the investments total net cash flows minus initial costs. If the result is positive then the investment should be accepted. Negative results should be rejected. The NPV indicates the investment’s value, or profitability. IRR. This method is more often used to make investment decisions with companies. The IRR calculation is the discount rate of interest that decreases the asset’s net present value to the cost of the investment, or  back to zero. This is the true economic return earned. The IRR should be equal to or greater than the cost of the capital, or hurdle rate, to accept the investment. Competition Bikes requires a 10% hurdle rate to pursue the investment. Lower results should reject the investment. Growth is considered in this method. The IRR is the efficiency and yield of an investment. Competition Bikes Inc. has provided the following five year projection on NPV and IRR. This is provided in both the low demand and moderate demand scenarios. Concerns for NPV – Low Demand. After investing $600,000 in this scenario, the total present value of $573,260 yield a negative $26,740 NPV. Although this does not mean the company will lost money in this scenario, it does mean they will not meet their self-set 10% hurdle rate. Growth in sales is set at 49,000 or six units yet not enough to increase to a positive NPV in five years. This is an indication the company should not move forward with the expansion as investors will most likely not want for the cost of capital to be realized. The global economy is also at a low point which give Competition an even higher risk of not making its even low demand model sales expectations. Concerns for NPV – Moderate Demand. After investing $600,000 in the moderate scenario, the total present value is $602,243 leaving a NPV of $2,243. While this is a positive number, it is not a high one so the company would have to decide if projections were more accurate in the moderate demand, or low. If Competition Bikes does not meet its projections by any margin, this NPV will move into a negative status. In addition the declined economy, Competition Bikes has been over predicting sales in recent years. If the company follows this same pattern, the numbers in this scenario could be off. Concerns for IRR – Low Demand. The rate of return for this scenario is 8.7%, 1.3% lower than Competition Bikes’ 10% threshold. This indicates the project will not be funded or profitable, steering investors away from investing. Concerns for IRR – Moderate Demand. The rate of return for this scenario is 10.1%. Although it is above Competition Bikes’ set limit for moving forward, it barely meets the minimum. With the market in a down swing, its best to look at the low demand rather than moderate at this point. Having the moderate barely meet the 10% should raise concern for the company. Investors may not want to spend money for a venture that is marginally acceptable. Not recommended. From the summaries above on the NPV and IRR, it is not recommended that Competition Bikes move into the Canadian market at this time. There is a possibility that the expansion would be a success, but the risks are too high. The 10% rate of return is not only rarely met in these scenarios, that threshold may be a little low too. Expansion into another country with additional building planned is much riskier than just an internal investment due to economic and regulatory issues. The cash flows used to create these scenarios are not exact either. Competition Bikes would need to leave itself a little more room for cash flow fluctuation. Although they will be spending more on advertising in the first year, it is unknown if it will increase sales. The expansion is something that could be reconsidered after the economy bounces back. Working Capital for Canadian Expansion A3. (1) Obtain Working Capital. Working capital is Assets minus Liabilities and can be obtained by several avenues. Competition Bikes will have to build working capital to afford the expansion. Below are some of the avenues the company can use to acquire working capital. Debt financing. One time transaction bank loans is debt financing and usually comes with a higher closing cost. Loans can also be obtained through government loans such as the Small Business Administration. These type of loans can be long or short term but general hold high interest rates. SBA loans general have terms less restrictive than those at the bank because they are services through the loan guarantor, not the lender. Avoiding using outside monies to fund a project is optimal assuming a favorable cost/ benefit ratio. Revolving Credit. Credit can be used continuously to fund multiple projects. Lines of credit tend to have lower payments than bank loans. Lines of credit can be used as working capital when appropriate. Interest is paid here and monthly payments cannot be missed or the company’s credit rating is at risk. Liquidating Assets. Companies can sell unnecessary assets such as structures or buildings, land, machinery, etc. Competition Bikes can sell its excess parts. Equity Financing. Offering preferred and common stock is a way to obtain working capital without going further into debt. Maximizing shareholder returns will raise funds for the company. Stocks will dilute ownership in the company but make the expansion possible without the threat of debt. Increase Sales. Managing already existing finances such as paying off debts, increasing sales and capacity, investing in marketing and advertising, lowering production costs and growing the business can increase working capital. Retained earnings can be reinvested as working capital as well. Lending. Working capital can be obtained from selling accounts receivable or increasing their accounts receivable collections system. Loaning more money with longer terms or reducing fixed and variable costs can also increase working capital. A3. (2) Manage Working Capital. Managing or preserving working capital is  done by budgeting, reinvestments, managing accounts payable and receivable, and inventory and asset management. There are other ways to manage or preserve working capital but these are discussed here. Budgeting. Competition Bikes can maintain its working capital by budgeting properly. Controlling costs and managing debt and assets will maintain cash flow. The balance sheets showed errors and ambiguous spending. Good record keeping is essential to know where money is going and where it’s coming from. The company can improve their debt management to know where costs can be cut. Paying debts on time will decrease interest paid and worthy record keeping can help know when the debts are due. Reinvesting. The company can reinvest working capital to preserve it. The 50% common stock and 50% preferred stock structure mentioned earlier will help the company manage working capital. This option yields the highest earnings per share building capital. Increase Accounts Receivable Interest and Discounts. Competition Bikes currently invoices at net/30 days. This should be reviewed and shortened to less than 20 days. Discounts should not be offered in excess and should be careful managed. Smart cost control maximizes cash flow. Accounts payable credit terms can be negotiated with suppliers as well. This may decrease interest and help maintain working capital. Inventory/ Asset Management. In addition to an acceptable record keeping system, inventory control can help the company in knowing what’s on hand, what’s incoming and outgoing. This can help determine what assets can be liquidated and used as working capital. A3. (3) Lease vs. Buy. Deciding whether to lease or buy is a way to manage or preserve working capital. Competition Bikes needs to know which the better option to preserve their working capital is. The assessment below discusses the options. Lease. The lease for Competition Bikes would be a 5 year lease with fixed  monthly payments. There is a $50,000 buyout option at the end of the lease and no tax deductions are offered. There is a 6% interest rate on leasing the facility. The company would not be locked into keeping the building after the 5 years. Leasing would yield a lower NPV than purchasing the facility and sustains working capital. Buy. If Competition Bikes chooses to purchase the Canadian facility, it would increase debt and still have fixed monthly payments. However, they would be able to take advantage of tax deductions. There is also a 6% interest rate in this option. Some considerations in purchasing are the depreciation of the facility, the down payment, and the maintenance upkeep. Purchasing the facility requires a $50,000 down payment which results in lower monthly payments than leasing. Recommendation. Leasing seems to make the most financial sense for Competition Bikes in this scenario. Investing the $50,000 into the company to build revenue and manage working capital is a smarter decision than spending it on a down payment. This option will produce less debt and less risk of bad credit. Given that future growth is unknown, it is better to lease for five years and determine at that time how to expand based on how the market is doing at that time. There is lower inherent risk in leasing and better chance of increased returns. The overall lease payments will be less than purchasing so the company should lease, reassess after 5 years, and look into the option to buy at that time. Merger or Acquisition A4. Competition Bikes must consider to merge with or acquire Canadian Bikes Inc. If the company does nothing, it could be faced with market competition that slides the company under. Below we look into the options, the consequences, positives and negatives of each. A final recommendation is made for Competition Bikes based on all information thus far. Merger. In a merger, the two companies would combine. Competition Bikes is a larger company with 975,000 shares of common stock versus Canadian Biking’s  200,000. Currently the earnings per share for Competition Bikes is .032 and Canadian Biking is at .121. If the companies merge, their earnings per share would increase to .053, an increase for Competition Bikes. In a merger, the acquiring company uses its own securities in exchange for the merged company’s so it will dilute shareholder equity. However, since the exchange would be 3:1 basis, this would result in 65% increase for Competition Bikes, holding as a positive for the company. Both companies have expected continued growth over the next five years becoming a stronger competitor. A Merger would mean increased technology, customer base, and pre-established business departments. The merge will also come with more employees and possible duplication of duties making layoffs inevitable. Acquisition. In an acquisition, one company (in this case Competition Bikes) will take ownership of the target company (Canadian Biking). Canadian Biking Inc. will no longer exist and stocks for Competition Bikes Inc. will continue, expecting a return on investment. Competition Bikes is offering shares at 1.43, 30% premium over their current stock of 1.10. The projected cash flow does not meet the 10% hurdle rate Competition Bikes requires for investments. With an offer price of $286,000 and present value of $212,138, that would leave a negative NPV of $73,862. This will not leave the company with a return on investment. Since Competition Bikes has had decreased sales in the past few years, acquisition is riskier than a merger. In an acquisition Competition Bikes would acquire all of the patents and copyrights from Canadian Biking. Conclusion Competition Bikes Inc. is considering a Canadian expansion and is faced with the determination whether to merge with or acquire the Canadian Biking Inc. facility. We have analyzed the source and management of working capital to help the company in the decision to merge with Canadian Biking, Inc. or to acquire the company. After consideration of the items discussed, it is recommended that Competition Bikes merge with Canadian Biking Inc. The monies required to merge with Canadian Biking Inc. should come from 50% preferred and 50% common stock. The growth of the merged company yields more  projected cash flow over five years than if Competition Bikes simply acquires Canadian Biking Inc.

Billboard Hot Country Songs number-one singles Essay Example for Free

Billboard Hot Country Songs number-one singles Essay Hello my name is Chassidy Mitchem I would absolutely love to be a part of your cosmetology program. I love to do hair and, make up. Doing hair is something I enjoy doing in my free time. It’s a way to get away from people and let my mind explore into better things. I enjoy looking and trying new hair styles and colors. I have done makeup and hair for Homecoming court and Grand March. It would be an absolute dream to get into this school and have some hands on time with the things I love doing while learning more about Cosmetology. Cosmetology is very important to the world because someone will always want their hair done or make up done. Most people only want to go to a professional so they know they will be getting the best of their money. You could also be able to set up your own business around your area. I differ from a lot of my peers because no one really understands the importance of Cosmetology the way I do. Everyone thinks it useless. Cosmetology is just as important as other jobs because someone will always need you. There will always be someone needing their eye brows done or maybe there nails especially during homecoming and prom or even a wedding. I’ve talked to a couple people and got some really interesting opinions. Some people has told me I wouldn’t make it and some people has told me I would, but my motto is â€Å"Never give up, because you never know how close you are to fulfilling your dream.† I plan on getting this degree and opening my own salon and I feel that it will give me knowledge I need to know for success. I learned to do this at a young age and I feel very strong about this career. I believe this will be the field I dedicate myself to. I hope to be attending this college at whatever time the school year would begin Billboard Hot Country Songs number-one singles. (2016, May 06).

Supply chain management in web technology Essay

Supply chain management in web technology - Essay Example In this research work, the theoretical aspects of the Supply Chain and how technology, specifically, the internet has helped in augmenting this system and in what way has the companies gained out of it. In order to execute this, measures are defined for targets by establishing key performance indexes which would be measured at the beginning of a technological implementation and measured again at the end of the technological implementation. This helped in establishing the gain out of technology. Technology helps in augmenting efficiency of supply chain management, particularly on the Global scale. However, SCM is not all technology but also an art. Careful work execution is as much important as technology for a successful SCM. 1. Study of the existing systems and the theory behind Supply Chain Management. This would involve going through the available literature in order to identify the various factors that make up the Supply Chain. Impact of every one of the factors is ascertained and the technology solution for every one of the factors is also identified, if available. Once these are identified, then the work in the case progresses with more clarity added to the nature of factors that influence the technology changes. Available literature is exhaustively collected for this purpose and the same is documented and referenced. 2. 2. Once the literature review is done, appropriate analysis is done to ascertain the impact of technology on supply chain. This would help in understanding the success of the technological innovations in this field. In addition to that, the effectiveness of such technological innovations and the extent to which they are trustable is also identified from the analysis. The analysis of the literature will also throw up other issues that have come up because of technological application on the supply chain. The advantages will also be discussed in short and the disadvantages along with issues that need to be countered or remain unsolved are also listed down. 3. An industry visit is done to identify the type of usage that exists in the industry in terms of supply chain. The practical issues that come up during the course of normal work and the methodology adopted by the industry's managers to counter these issues are also identified and taken in for consideration. One or two managers of the company are requested for an interview and then a set of qualitative questions are posed to them on the success of Supply chain management tools. The extent of success is then ascertained and points are allocated on a Likert Scale from 1 to 8. Based on this, another set of analysis is done and its closeness to the theoretical study is identified, if available. Secondly, during the course of the work, other targets listed are also met. 4. A final conclusion is drawn based on the literary review, the short survey that was taken from the company and its managers. Finally, the objective of the work, whether the technological application favours the supply chain and whether it has optimised work is done and identified. Literature Review Approach The methodology adopted for this literature review will be as follows: 1. Different products in the industry for Supply chain mana

Poetry Interpretation Essay Example | Topics and Well Written Essays - 500 words

Poetry Interpretation - Essay Example By outward appearances, the man looks like he has it all. He is in a relationship, and probably seems well off within the trappings of a successful life. His lover is very committed to him. Yet something eats away at him and he is neither satisfied nor happy. Quite to the contrary, he feels out of control - like he is going "down the drain;" and he cannot control it because his life has assumed its own trajectory. His "body spins and sinks" like a rock tossed into deep murky water. His only escape is to fall asleep, but sleep merely throws him "into a black hole." From a black hole to sinking and being sucked down a drain, all of the imagery of this poem suggests someone unable to resist the overwhelming pull of gravity sucking him toward an undesirable existence. The things that should be pleasant for the man - sex and love - are more like drudgery and chores. Sex makes him "feel like a servant." Love makes him "feel like a slave." These things are serving someone else, his master, rather than himself. The imagery of a servant and a slave implies a sense of subordination and a life spent at someone else's pleasure. While his lover thinks the relationship is wonderful, that lover fails to see the one-sidedness of it all. The old notion of a committed lover being shackled with a ball-and-chain comes to mind.

Eco Essay Example | Topics and Well Written Essays - 2500 words

Eco - Essay Example A customer relation is one primary feature of business that can allow a small company to outshine large business competitors without spending much money or time. Truthfully, customer relations will build a concrete reputation for an organization and earn repeat clientele. This paper will address customer relations as a congruent economic issue in an organization. In order for any organization to succeed, it must bear in mind that the ultimate goal of all customer relations programs is to establish and build long-term relationships- those in which customers keeps buying the product or service and recommending it to others- with customers. For an organization to achieve this objective, it may need to go to greater lengths to build strong reputation for lavishing their customers with special services, gifts, discounts or other benefits (Schulz, 2008). Nowadays, customer relations has become such a vital paradigm in modern business that people commonly refer to relations with an organiza tion’s internal and external customers. ... Nevertheless, acquiring clients and maintaining them is yet another challenge facing many organizations worldwide. The main aim for all businesses is to gain the most out of their activities. Therefore, customers and customer relations are essential factors that contribute to achievement of this goal (Bliss, 2006). Cognitively, it becomes vital to focus on customer loyalty in order to achieve an organization’s objectives. The main purpose of most well developed customer relations is to turn one time or occasional clients into loyal buyers. Customer relations specialists distinguish loyalty from satisfaction, putting across that, it is possible for an organization to satisfy customers but have no particular loyalty. Some customers claim to draw satisfaction from one company’s products but still buy competitor’s products as well. Indeed, what mostly drives the emphasis on loyalty is the bottom line (Kollin, 2011). Customer relations analysts assert that, by estimat es, an organization can spend much higher amount of money in attracting new customers compared to that required in bringing back loyal customers. In addition, repeat customers are more likely to recommend the company to others and try to out the company’s latest products and services. The financial results are that a small percentage increase in customer loyalty can translate into significant rise in profits. Nonetheless, the opposite of customer loyalty- customer turnover- can deplete an organization’s marketing resources and signal weaknesses in the firm’s brand image or its competition position. However, it is worth noting that, high turnover does not necessarily depict that the company’s underlying products or services are at fault. Rather, it may be the negativity or

Compare Chartres Cathedral and Canterbury Cathedral Term Paper

Compare Chartres Cathedral and Canterbury Cathedral - Term Paper Example The Cathedral statues of the on the right hand are: The statue of Isaiah a prophet, proclaiming that â€Å"there shall come forth a rod out of the stem of Jesse, and a Branch shall grow out of his roots†7. The flowering stem was hold by him and a figure of Jesse is below the Prophet. The statue of Jeremiah signifying Passion is holding a Greek cross and we can see an attentive follower near him. The statue of Simeon holds the Child. John the Baptist is depicted as a very thin man from fasting and we can see the dragon near his feet. St. Peter represents a pope and Elijah is located the wheels of his chariot and there is a follower Elisha holding his mantle8. The date of South Portal establishment is 1224-50 and is devoted to the New Testament. The main concern of the New Testament is a human-like appearance of Jesus Christ. The sculptures of martyrs and the confessors are surrounding the Christ. The Royal Portal or the West Portal dated circa1150 is devoted to Jesus Christ and Mary. The statues decorating this portal are the statues of the royalty and themes from the Old Testament. This feature signifies an essential shift from Romanesque to Gothic: â€Å"the whimsical elongation of the figures reflects the former while the realistic and emotive faces anticipate the latter†9. The statue of Jesus Christ surrounded by the symbols of Four Evangelists depicts the Last Judgment. Both human and divine nature of Jesus Christ is depicted in the sculpture. There is a sculpture of Anne and Joachim, who struggled against infertility before the birth of Mary and this sculpture is often positioned as a potential healer of motherhood and children. The left-hand portal is devoted to the Ascension of Christ10. The right-hand portal is devoted to the themes from the... The intention of this study are Chartres Cathedral and Canterbury Cathedral as historical monuments of gothic architecture. The main features of gothic architecture are perfectly seen in these two cathedrals: intricate architectural images, perplexed structures and many other specific features reflect the specific nature of the middle ages and gothic times. The strain glass windows in Chartres Cathedral and in Canterbury Cathedral reflect the main peculiarity of Gothic architecture. Moreover, these two Cathedrals reflect the transition and mixture of Gothic and Romanesque styles in the architecture. There is a complex craft of the windows: â€Å"The rose- window is a consistent feature of the Gothic churches in the France, but not of those in Normandy; and there has been a tendency†. Large rose windows of the Cathedral are also the facts witnessing a Gothic architecture. The interior reflects the Gothic style in architecture as well. There are three parts in Chartres Cathedral interior, such as clerestory, triforium, and arcade. This fact differs from the early Gothic architecture, because in high Gothic style triforium is instead of gallery, and at clerestory, quadripartite rib-vault is instead of sexpartite rib-vault. There are four divisions in the nave of the Chartres Cathedral and the ceiling is higher than sexpartite rib-vault. Consequently, the height of Chartres Cathedral is higher than using sexpartite rib-vault. Therefore, this Cathedral is towering and it is the best evidence of the Gothic style in architecture.

Research a community organization on an individual basis Essay

Research a community organization on an individual basis - Essay Example Beneficiaries of the organization’s programs are categorized into federations that exhibit religious, ethnic, economic, and racial diversity (http://www.picocalifornia.org/). In essence, PICO California strives to improve the social, economic, and political welfare of working families living in the State of California. The primary goal of the community organization is to enhance statewide relations and interactions among California residents. To do this, PICO California networks working families by identifying and creating awareness about common social issues that affect residents in the state. Upon identifying statewide issues that affect residents, the organization goes a step further to voice the concerns of the people. The idea is to ensure that the voices and concerns of working families and residents in general reach the state’s leadership. In other words, PICO California acts as an intermediary between the people and policy makers in the state of California. In many communities around the United States, policy arenas remain inaccessible to the public. With PICO California, however, the underlying social responsibility is to enhance public participation in policymaking processes. In this respect, a number of factors influence PICO California’s operations. These factors include health, employment, education, security, and local community empowerment. By evaluating and assessing these factors, the organization strives to promote family and social growth and development. It is evident that each of these factors is strategic in the formulation and implementation of state policy. Social initiative is the primary driver of PICO California’s community operations. PICO federations network on congregational basis, resulting in strong culturally diverse social interactions and relations. The organization’s social initiative encompasses increasing access to quality healthcare, minimizing violence in California, improving state

Art & the Surreal Essay Example | Topics and Well Written Essays - 500 words

Art & the Surreal - Essay Example One of the most famous surrealists is Salvadore Dali, a Spanish artist who expressed himself in making photographic sketches that presenting irrational objects. Swans Reflecting Elephants is one amazing work of Dali which pictures swans swimming on a lake whose reflections in the water appear like elephants. Showing the main features of a surrealist work of art, Dali juxtaposed the beauty and serenity seen in swans to the heavy appearance of the beast of burden, the elephant. Other contrasting images in the painting are the dark, nightmarish images in and around the lake with the use of colors, and the bright, cloudless sky behind the lake. This style arouses the imagination of viewers with the artist intentionally making use of the subconscious in the hope of awakening the totality of a person (Duiker 84). The extreme presentations of the expressions of surrealist artists in their art works intend to shock its viewers into facing the realities of life. Aside from paintings and sculp tors, surreal ideas were also expressed in literary forms. However, though in a different expression, the views are similarly seen in poets’ literary styles.

First Confission Essay Example for Free

First Confission Essay The opening sentence drew me in: All the trouble began when my grandfather died and my grandmother my fathers mother came to live with us. We learn that the grandmother, a country woman, is unsuited to life in town. She walks around the house barefoot, eats with her fingers, and drinks quite a bit of porter straight from the jug. The narrator, a seven-year-old boy named Jackie, is mortified by this behavior, while his older sister Nora sucked up to the old woman for the penny she got every Friday out of the old-age pension In one instance, we find Jackie, who refuses to eat any meal prepared by his grandmother, hiding under the table threatening to protect himself with a butter knife as Nora tries to force the food upon him. Jackie is preparing for his first confession and communion. The teacher, who talks mostly about hell, has scared him to death. When the day of confession arrives, Jackies mother sends Nora to accompany him to the church. Now that girl had ways of tormenting me that Mother never knew of. She held my hand as we went down the hill, smiling sadly and saying how sorry she was for me, as if she were bringing me to the hospital for an operation. Oh, God help us! she moaned. Isnt it a terrible pity you werent a good boy? Oh, Jackie, my heart bleeds for you! How will you ever think of all your sins? Dont forget you have to tell him about the time you kicked Gran on the shin. Nora goes to confession first. Noras turn came, and I heard the sound of something slamming, and then her voice as if butter wouldnt melt in her mouth, and then another slam, and out she came. God, the hypocrisy of women! Her eyes were lowered, her head was bowed, and her hands were joined very low down on her stomach, and she walked up the aisle to the side alter looking like a saint. You never saw such an exhibition of devotion; and I remember the devilish malice with which she had tormented me all the way from our door, and wondered were all religious people like that, really. Jackies turn follows. The description of the confession is quite comical and well worth reading. The entire piece is about five pages long and can be found  here. I loved this story and will look for others by Frank OConnor.

Student Giving Intramuscular Injections

Student Giving Intramuscular Injections This paper particularly focuses on my experience of learning from reflection on giving intramuscular (IM) injections, using Gibbss (1988) reflective model. I demonstrate how practice anxiety, as a student nurse, can be dealt with through effective mentoring. I chose the seminal theory of Gibbs reflection on practice, as it illustrates six significant stages; description, feelings, evaluation, analysis of the incident, conclusion and an action plan Ghaye and Lillyman (1997). Gibbs cycle is used throughout the process of reflecting on the incident to help me make sense of my practice and understand what l could do differently to enhance good practice. I use my experience from a placement simulation as I could not be on actual placement due to unforeseen circumstances. Reflection is a process through which healthcare practitioners and students can learn from experience and use the knowledge to inform and improve practice Schon, (1983). The ability to reflect on ones actions is particularly imperative in clinical practice and discourse. As Jarvis (1992) asserted, there is no consensus on the definition of reflection as it is a broad concept. Reid (1993, p305.) define reflection as; a course of action reviewing an occurrence of practice to describe, analyse, evaluate and so inform learning about practice Schon (1983) identified two types of reflection which are; reflection in action, which takes place during the event where the practitioner may not be aware that it is happening and reflection on action, which takes place after the event. Jasper (2003) concluded upon the vitality of reflecting on action, as it transforms experience into knowledge which enhances good clinical practice. Description During my first placement simulation, I practised giving intramuscular injection, is the best tolerated form or injection, and the safest way of injecting medication into a patient Shepherd, (2002). Within the first week of my placement simulation, I was offered the opportunity to practise administering an injection on a dummy. However, as a student, I was cautious and anxious, feeling that I was not competent enough. I discussed my concerns with the lecturer who was empathetic and helped formulate a plan to conquer my doubts. The plan involved a step-by-step conversation of the procedure of administering intramuscular medication, preparing the medication on numerous occasions and practising the injection technique on a dummy. Throughout these stages I was given the opportunity to discuss any questions, feelings or concerns that arose. Once confident enough to do so, under the supervision of the lecturer, I administered an IM injection to a dummy. I recorded my intervention in a refl ective journal. After giving the injection, I was given feedback and the opportunity to discuss my feelings which was valuable and of significance. Feelings As a novice, I never really enjoy giving injections, but after my second practise, good compliments from colleagues and lecturer my confidence increased. Most importantly, l kept thinking, if l gave the injection to an unwilling patient, how awful would I feel? I reminded myself, ethically, what is it like to carry out a therapeutic procedure that inflicts pain on another human being? All these challenges came to my mind before giving the injection. I began to feel quite anxious and nervous, wanting to delay the procedure for as long as possible hoping my anxiety would decrease. I believe the build up of nervousness beforehand is common, particularly for beginners like me. I prepared the injection using the necessary mathematical calculations, picked the right syringe and the right injection for the procedure. I then administered with my lecturer observing my technique, confidence and competence. Evaluation My preliminary anxiety about administering the injection was normal but as a student nurse, I ought to learn the technique and procedure of IM injections. This anxious behaviour could be explained in relation to the Joharis Window (Luft 1969). As in Joharis window, before being confronted with having to administer injection, I experienced an unknown area, whereby my fears and anxieties were anonymous to me and to others [my lecture]. Because I lacked self-awareness regarding these anxieties, I was unable to begin addressing my anxieties around administering the injection. This made me continue to avoid this area of practice, and as a result I did not develop this clinical skill before this incident. By the end of the incident, my feelings were known to me and others [my lecturer]. By disclosing my anxieties and fears to my lecturer and receiving feedback, my awareness of these issues increased. My lecturer commented on what l did right, wrong and what l could have done differently. R esultantly, I was able to address my feelings, areas of strengths, weaknesses and begin to develop the skill of administering injections. Analysis Department of Health (2008) identified lecturers as qualified nurses, who facilitate learning and supervise students. Mentoring also involves the assessment of the student in the practice setting NMC (2008). The interaction between mentor/lecturers and students is answer to minimise practice anxiety and professional intervention is often required to reduce any anxieties. This was resonant in my experience with my mentor while carrying out this procedure. Critically reflecting and understanding my feelings around giving the IM and after the procedure makes me think and evaluate what l ought to do differently in the future. This will enhance my technique and practice while also benefiting patient care. I am now aware of my competence as my mentor highly commended on my confidence, technique quality and the communication that l maintained with her throughout the procedure. Conclusion The description given in this paper is a general and subjective one that attempts to address my feeling and experience of giving the IM. It also aims at indentifying patterns and schemes in the experience of individuals in a similar context of giving IM for the first time. I believe, my experience will help educators to better understand the meaning of the anxiety that is observed as students undertake the act of giving their first injections. It will also help other students reflect and come to understand the meaning of that experience and not feel overwhelmed by this crucial initial experience. Action Plan I created an action plan to improve my practice and set out a course of action should a similar incident occur? Recording an entry in a reflective journal enabled me to record areas of practice that I want to develop and will allow me to track my progress regarding the administration of IM injections (Jack and Smith 2007).I also developed listening skills. Stickley and Freshwater (2006) argue that effective communication, which involves active listening, is an essential nursing skill, because of its beneficial effects on the patients experience. Word Court: 1100